- +918920681227
- sales@semcoindia.com
- New Delhi, Sahibabad, Bengaluru
Product Overview
The Semco High Altitude Test Chamber is designed to simulate low-pressure conditions encountered at high altitudes for testing lithium-ion cells, battery packs, and electronic products. It is widely used to evaluate product safety and performance during transportation and storage in aviation environments.
The chamber reproduces a vacuum level equivalent to 11.6 kPa (1.68 psi), as required by international battery transportation standards such as UN 38.3, ensuring batteries do not explode, catch fire, leak, or vent excessively under reduced atmospheric pressure.
Cell Aging Machines are designed to stabilize lithium-ion cells through controlled charge and discharge cycles, validating capacity, voltage consistency, and thermal behavior before assembly.
Battery Pack Testers perform complete electrical and safety validation, including voltage, current, insulation resistance, and protection checks.
LOCV Sorting machines measure open circuit voltage to group cells with consistent electrical characteristics, improving performance and lifespan.
Module Stacking systems precisely align and stack battery cells into mechanically stable modules for downstream processing.
Compression machines apply uniform pressure to enhance module strength, thermal contact, and long-term durability.
Laser Cleaning removes oxides and contaminants from battery tabs and terminals, ensuring clean, high-quality welding surfaces.
Vision-based polarity and CCD inspection detects alignment errors, defects, and missing components early in the process.
Laser Welding machines deliver precise, repeatable, high-strength joints with minimal heat impact.
End-of-Line testing validates electrical, functional, and safety performance before pack integration.
The Pack Line integrates final assembly, enclosure installation, and testing for scalable battery production.
EV battery production, energy storage manufacturing, battery research labs, electronics assembly, and OEM-based fabrication units.
This equipment is designed to support efficient and accurate battery assembly and testing workflows. With durable construction, precision control, and user-friendly operation, it delivers consistent performance for both small-scale and large-scale production environments.
Product Name
Description
| Parameter | Specification |
|---|---|
| Product Name | Water Proof Test Chamber |
| Model | SI-LS-WPT-56S |
| Supported Tests | IPX5, IPX6 |
| Available Chamber Volumes | 216 L / 512 L / 1000 L |
| Turntable Diameter | 300 mm / 400 mm / 500 mm |
| Turntable Speed | 1–9 RPM adjustable |
| IPX5 Nozzle Diameter | 6.3 mm |
| IPX6 Nozzle Diameter | 12.5 mm |
| IPX5 Water Flow | 12.5 ± 0.625 L/min |
| IPX6 Water Flow | 100 ± 5 L/min |
| Spray Pressure | 50–100 kPa |
| Spray Distance | 2.5–3.0 m |
| Controller | PLC + 7-inch touchscreen |
| Communication | Customizable |
| Chamber Material | SUS304 stainless steel |
| Power Supply | AC 380V ±10%, 50 Hz |
| Installed Power | 3.0 kW |
| Maximum Current | 8 A |
The product comes with a dedicated support and service package that includes activation, calibration assistance, and post-installation guidance.
Find quick answers to common questions about our BESS Assembly Line, including automation capabilities, supported battery types, customization options, safety standards, and production scalability.
Reviews
There are no reviews yet.